 |

Product Range |
Solar Power Pack |
Solar power pack is the system used to generate
electricity for locations where grid is inaccessible or the access is
prohibitively expensive. These systems can also be used in conjunction with
existing grid for uninterrupted supply of electricity. Easy Photovoltech's
solar power packs are based on proven solar technology, which makes them
highly efficient and completely maintenance-free. We manufacture and supply solar power pack, wind solar hybrid power, solar wind hybrid power system.
Solar Wind Hybrid
 |
|
Solar Wind Hybrid
|
Most reliable Eco-friendly,
Clean & Silent source of Power. No fuel required. Provision of
Battery Bank makes it the most reliable source of power. Negligible
maintenance. No recurring fuel cost. Modular design. Simple
installation. Can be mounted on ground, roof top, etc. Savings on
electricity bills Transportation problems and uncertainty in
availability of fuel are totally avoided by using solar Photovoltaic
systems. |
|
 |
Solar Charge Controller
Solar charge controller forms an essential component of
virtually all solar power systems that utilize batteries. The charge
controller is used to regulate the current flowing from the solar panels to
the batteries. These controllers prevent the battery from the damages caused
by overcharge and disconnect the battery in case of severe discharge by
shutting of loads. Easy Photovoltech's solar charge controllers are
specially designed to improve the battery performance and increase the life.
Key Features :
- A energy efficient controller for rural/urban solar charging system
- Low Power Load Controller and PWM solar charger in a single Unit
- Perfect solution for urban and rural requirements
- Keeps battery healthy for longer period
- Optimum utilization of Solar Power
- Optional Dawn/Dusk Operation with Timer
- Provision for Temperature Compensation
- Low PV to Battery Drop
- Easy Installation
- Simple Handling
40 AMP
Technical Data :
| Charge Controller Type |
SPL2440A |
| Nominal Voltage |
24V/48V/96V |
| Nominal SPV Power |
1200W(24V)/2400W(48V)/4800W(96) |
| Self Consumption |
<6mA |
| Battery Charging Current |
40A max |
| Charging Method |
CC-CV |
| Charge Control |
PWM |
| Over Load Current |
>40A |
| Max Load Current |
3 X reted Currnet |
| PV to Battery Drop |
* 200 mv at rated current |
| Display Indications |
LED (Output On, Low Battery, Over Load, Charging) |
| Connection |
Screw Type Connector for 10 Sq mm wire |
| Installation |
Table / wall Mounting |
| Dimension (L X W X H) in mm |
215 X 205 X 65 |
| Box |
MS sheet box with non weatherproof power coating |
| Luminary Degree of Protection |
IP 20 |
| Cooling |
Natural air cooled |
| Ambient Temperature |
-20°C to +50° C |
| Temperature Compensation |
-.005V/Degree/Cell |
|
 |
20 AMP
Technical Data :
| Charge Controller Type |
SPL1220A |
| Nominal Voltage |
12V/24V automatic selected |
| Nominal SPV Power |
300W(12V)/ 600W(24V) |
| Self Consumption |
<6ma |
| Battery Charging Current |
20A max |
| Charging Method |
CC-CV |
| Charge Control |
PWM |
| Over Load Current |
>20A |
| Max Load Current |
3 X reted Currnet |
| PV to Battery Drop |
* 200 mv at rated current |
| Display Indications |
LED (Output On, Low Battery, Over Load, Charging) |
| Connection |
Screw Type Connector for 10 Sq mm wire |
| Installation |
Table / wall Mounting |
| Dimension (L X W X H) in mm |
185 X 130 X 85 |
| Box |
MS sheet box with non weatherproof power coating |
| Luminary Degree of Protection |
IP 20 |
| Cooling |
Natural air cooled |
| Ambient Temperature |
-20°C to +50° C |
| Temperature Compensation |
-.005V/Degree/Cell |
|
 |
10 AMP / 6 AMP
Technical Data :
| Charge Controller Type |
SPL1210 |
SPL1206 |
| Nominal Voltage |
12V/24V |
12V |
| Nominal SPV Power |
150W (12V) / 300W (24V) |
100W |
| Self Consumption |
<6ma |
<6ma |
| Battery Charging Current |
10A max |
6 A max |
| Charging Method |
CC-CV |
CC-CV |
| Charge Control |
PWM |
PWM |
| Over Load Current |
>10A |
6 AMP |
| Max Load Current |
3 X reted Currnet |
|
| Display Indications |
LED (Low Battery, Charging, Over Load) |
|
| Connection |
Screw Type Connector for 4 Sq mm wire |
|
| Installation |
Table / wall Mounting |
|
| Dimension (L X W X H) in mm |
170 X 100 X 55 |
|
| Box |
MS sheet box with non weatherproof power coating |
|
| Luminary Degree of Protection |
IP 20 |
IP 20 |
| Cooling |
Natural air cooled |
|
| Ambient Temperature |
-20°C to +50° C |
|
| Temperature Compensation |
-.005V/Degree/Cell |
|
|
 |