 |
Product Range |
Solar Module |
Easy Photovoltech's solar module provides a perfect
solution for electricity generation from sunlight in an efficient and
environment friendly manner. These modules have a high impact resistant and
highly transparent tempered glass plate, which offers adequate protection
against environmental hazards such as rain, hail, snow, ice and storms. The
high quality solar modules are easy to install and require minmum
maintenance.We manufacture solar module, sine wave solar inverter, solar modules manufacturers, digital solar inverter.
Solar PV Module
12V (Other Voltages Optional) Mono/Multicrystalline
Easy Power modules use crystalline solar cells. The solar cells are
individually characterized and electronically matched prior to their
interconnection. Encapsulation beneath imported high transmission tempered
glass is accomplished using an advanced, UV resistant thermosetting plastic.
The encapsulant, ethylene vinyl acetate, cushions the solar cells within the
laminate and protects the cells from etching due to harsh weather
conditions. The high strength polymer sheet protects the rear surface from
ingress of moisture and mechanical damage. Easy Power modules are a
versatile solution for stand-alone power systems, home light systems, solar
displays, telecommunication and water pumps. Due to higher system voltages
Easy Power modules are excellently suited for grid connected solar
photovoltaic implementations.
|
Key Features :
 |
|
Solar PV Modules
|
- More Energy
- Excellent Value for Money
- IEC 61215 certified
- ISO 9001 certified
- MNRE approved
|
| Electrical characteristic @ STC of 1000 W/m2, 25°C,
AM 1.5 |
PSS 1205 |
PSS 1210 |
PSS 1215 |
PSS 1318 |
PSS 1220 |
PSS 1225 |
PSS 1230 |
PSS 1235 |
PSS 1237 |
PSS 1240 |
PSS 1250 |
PSS 1260 |
PSS 1270 |
PSS 1275 |
| Nominal Voltage (volts) |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
12 |
| Open Circuits Voltage, V (volts) |
21 |
21 |
21 |
21 |
21 |
21 |
21 |
21 |
21 |
21 |
21 |
21 |
21 |
21 |
| Voltage at Max Power, Pmax (volts) |
17.2 |
16.8 |
16.8 |
16.8 |
16.8 |
16.8 |
16.8 |
16.8 |
16.8 |
16.8 |
16.8 |
16.8 |
16.8 |
16.8 |
| Short Circuit Current, IK (Amps) |
0.32 |
0.63 |
1.05 |
1.26 |
1.4 |
1.75 |
2.1 |
2.4 |
2.55 |
2.75 |
3.45 |
4.15 |
4.9 |
5.25 |
| Current at Max Power, Imax (Amps) |
0.29 |
0.58 |
0.9 |
1.05 |
1.2 |
1.5 |
1.75 |
2.1 |
2.2 |
2.4 |
3 |
3.58 |
4.15 |
4.45 |
| Max rated Power, Pmax (watts) |
5 |
10 |
15 |
18 |
20 |
25 |
30 |
35 |
37 |
40 |
50 |
60 |
70 |
75 |
| No of cells/ module |
36 |
36 |
36 |
36 |
36 |
36 |
36 |
36 |
36 |
36 |
36 |
36 |
36 |
36 |
| Weight (Kg) |
1.3 |
1.75 |
3.5 |
4.5 |
4.5 |
5.5 |
6 |
6 |
6.5 |
7.5 |
9 |
9.5 |
10.5 |
11 |
|
|
Solar Inverter
DIGITAL SOLAR INVERTERS
(PURE SINE WAVE)
ADP Pure Sine Wave Solar Inverters are very perfect
for hybrid solar system. It has inbuilt sine wave inverter and PWM solar
charger/SMPS charger in a single unit. It is specially designed to keep
battery healthy for longer time period.
For the minimization of electrical power, it uses optimum utilization of
solar power with the technology of interactive solar charging with grid. It
has very stable output voltage of 220V (+/-5%), even in wide input voltage
ranging from 130V to 270V in inverter mode and from 180V to 260V in UPS
mode.
Other features are it is facilitated with high surge power for starting
critical loads, simple and easyhandling with high reliability. Another
significant point is its very low 'no load current'.
These inverters are available without solar charger also which comes as EY
models.
ADP Modified Sine Wave Solar Inverters perform adequate for general home
lighting and computer use. These inverters have wide input range of 120V to
270V or computer compatible of 180V to 260V. This can be selected by soft
On/ Off switch at the front panel. The charging current and algorithm is
designed for prolonged battery life.
These Inverters features solar charging with PWM solar charge controller in
built. User can get the benefit of both the solar energy and mains utility
whichever is available. Some of the models have Interactive solar charging
where a main charging is automatically adjusted giving preference to the
solar current. These inverters are available without solar charger also
which comes as EX models.
|
INV300ESY/INV625ESY
- High surge power for starting of critical loads.
- Pure sine wave output ensures failure free operation of
Load.
- 100% short circuit protection
- Efficiency greater than 90%
- Perfect design, Easy Installation
- PWM MOSFET based solar charge controller for efficient
battery charge.
- Optimum co-ordination of charge controller and Inverter and
AC charger.
- Highly Economic and reliable.
- Single/Double Battery Type
- Interactive Solar Charging with Grid Power
- SMPS based Electric charger
|
Technical Data :
| INVERTER TYPE |
INV300ESY |
INV625ESY |
| Input Voltage |
130-270V (Inverter Mode) 180-260V
(UPS Mode) |
| Input Frequency |
40Hz - 65Hz |
| Output Voltage, Frequency |
220V + 5%, 50 Hz |
| Nominal Power |
280W |
500W |
| Surge Power |
200.00% |
| Output Waveform |
Pure Sine Wave |
| Self Consumption |
500ma |
600ma |
| Nominal Battery Voltage |
12V |
12V/24V |
| Solar Charging Current |
20A |
| Charging Method |
CC-CV(boost)/CV(Float) |
| Charge Control |
PWM |
| AC Charging Current |
3A (Low) 4A (High) |
4A (Low) 6A (High) |
| Solar Charger Designed For (Optional) |
25%/ 50%/ 75% Grid Power Sharing |
| UPS/INV Mode Selection |
Toggle Switch |
| Mode Indication |
Flashing LED (Mains/Inv LED) on UPS
mode and steady LED on Inverter Mode |
| Display Indications |
LEDs (Mains-On, Low Battery,
Over-Load, Charging Mains, Charging Solar) |
| Battery Connection |
1 mtr long 6mm Sq Copper wire with
lugs are provided |
| SPV Connection |
30A ST-2 Connector at the rear |
| AC Connection |
5A 5 pin AC socket at the rear |
| Installation |
Table mounting |
| Dimension (L X W X H) in mm |
315 X 126 X 126 |
314X 242X 118 |
| Weight |
6.5Kg |
9.8Kg |
| Degree Of Protection |
IP 20 |
| Cooling |
Temperature Controlled Fan |
| Ambient Temperature |
-10°C to +50°C |
|
|
|
Technical Data :
| INVERTER TYPE |
INV2500ESX |
INV1450EXX |
| Input Window |
Wide/ Narrow selectable |
| Output Waveform |
Modified Sine Wave |
| Input Frequency |
40-60 Hz |
| Battery |
48V (Tubular/ Flat) |
24V (Tubular/ Flat) |
| Overload DC Current |
48A |
58A |
| Output Frequency On Battery |
50 Hz |
| Output Voltage |
220V Compatible |
| Solar Charging |
20A Maximum, Interactive Charging
With Mains (available in ESX models only) |
| Solar Charging Type |
PWM Boost/Float |
| |
Three Stage Charging CC (Bulk)-CV (Absorb)-CV
(Boost)/Float |
|
| Mains Charging |
Initial Charging Current: 10A DC
Absorb Voltage : 55.2V Boost
Voltage : 56.8V
Float Voltage : 54.4V |
8A DC
27.6V
28.4V
27.2V |
| Protection |
Overload Output Short Deep Battery
Discharge Charging Circuit Failure MOSFET Circuit Failure Feedback
Circuit Failure |
| Interface (INV2500ESX) |
Display - 2 Row 16 Col LCD with
Backlight Bicolor LED Display for Power/Fault/Status Push to On
switch for on/off/ Mode Change |
| |
|
| Interface (INV1450ESX) |
Green LED for On Mains Orange LED
For On Battery Bicolor LED display for Charging Status Red LED for
Low Battery Indication Red LED for Overload Indication Red LED for
Fuse Blown Indication (Both Load and Charging) |
| Output Socket |
2 nos of 15A 5 pin socket |
| Input |
1.5 Sqmm 3 core flexible cable |
| Line Protection |
MCB IN phase with varistor in
charging circuit. |
| Gross Weight |
30 Kg (approx) |
23 Kg (approx) |
| Net Weight |
26 Kg (approx) |
20 Kg (approx) |
| Dimension |
422 X 269 X 375 mm |
360 X 247 X 168 mm |
|
|
|
Technical Data :
| INVERTER TYPE |
INV1250ESX |
INV850ESX |
| Input Window |
Wide/ Narrow selectable |
| Output Waveform |
Modified Sine Wave |
| Input Frequency |
40-6C Hz |
| Battery |
24V (Tubular/ Flat) |
12V (Tubular/ Flat) |
| Overload DC Current |
49A |
60A |
| Output Frequency On Battery |
50 Hz |
| Output Voltage |
220V Compatible |
| Solar Charging |
20A Maximum |
| Solar Charging Type |
Series On/Off type |
| Mains Charging |
Three Stage Charging CC (Bulk) -CV
(Absorb)-CV (Boost)/Float |
Initial DC Charging Current: 10A DC
Absorb Voltage : 27.6V
Boost Voltage : 28.4V
Float Voltage : 27.2V |
14.2V
14.2V
13.6V |
| Protection |
Overload Output Short Deep Battery
Discharge Charging Circuit Failure MOSFET Circuit Failure Feedback
Circuit Failure |
| Interface |
Green LED for On Mains Orange LED
For On Battery Bicolor LED display for Charging Status Red LED for
Low Battery Indication Red LED for Overload Indication Red LED for
Fuse Blown Indication (Both Load and Charging) Push to on switch for
on/off/mode change |
| Output Socket |
1 Nos of 15A 5 pin socket |
| Input |
1 Sqmm 3 core flexible cable |
0.75 Sqmm 3 core flexible cable |
| Line Protection |
30mm Glass Fuse in phase with
varistor in charging circuit |
| Gross Weight |
18.2 Kg (approx) |
11.2 Kg (approx) |
| Net Weight |
17 Kg (approx) |
10.6 Kg (approx) |
| Dimension |
360 X 247 X 168 mm |
314 X 242 X 118 mm |
|
|
|
Technical Data :
| INVERTER TYPE |
INV625ESX |
INV300ESX |
| Input Window |
Wide/ Narrow selectable |
| Output Waveform |
Modified Sine Wave |
| Input Frequency |
40-60 Hz |
| Battery |
12V (Tubular/ Flat) |
| Overload DC Current |
48A |
24A |
| Output Frequency On Battery |
50 Hz |
| Output Voltage |
220V Compatible |
| Solar Charging |
20A Maximum |
| Solar Charging Type |
Series On/Off type |
| Mains Charging |
Three Stage Charging CC (Bulk)-CV
(Absorb)-CV (Boost)/Float Initial Charging Current: 8A DC Absorb
Voltage : 13.8V Boost Voltage : 14.2V Float Voltage : 13.6V |
| Protection |
Overload
Output Short
Deep Battery Discharge
Charging Circuit Failure
MOSFET Circuit Failure
Feedback Circuit Failure |
| Interface |
Green LED for On Mains
Orange LED For On Battery
Green LED display for Charging Status (300ESX)
Bicolor LED for Charging Status (625ESX)
Red LED for Low Battery Indication
Red LED for Overload Indication
Red LED for Fuse Blown Indication for Load and Charging (625ESX)
Switch - Push to On switch for on/Off/ Mode Change |
| Output Socket |
1 Nos of 5A 5 pin socket |
| Input |
0.75 Sqmm 3 core flexible cable |
0.5 Sqmm 3 core flexible cable |
| Line Protection |
30mm Glass Fuse in phase with
varistor in charging circuit (625ESX)
20mm Glass Fuse in phase with varistor in charging circuit (300ESX) |
| Gross Weight |
10.5 Kg (approx) |
5.9 Kg (approx) |
| Net Weight |
9.8 Kg (approx) |
5.25 Kg (approx) |
| Dimension |
314 X 242 X 118 mm |
315 X 126 X 126 mm |
|
|
|
|
