 |
|
Submersible Pump Systems
|
- lift up to 240 m
- flow rate up to 21 m3/h
- simple installation
- maintenance-free
- high reliability and life expectancy
- cost-efficient pumping
- 2 years manufacturer's warranty against defects in material
and workmanship
Applications
- drinking water supply
- livestock watering
- pond management
- irrigation
- etc.
Controller PS1200
- controlling of the pump system and monitoring of the
operating states
- mounted at surface (no submerged electronic parts)
- two control inputs for well probe (dry running protection),
float or pressure switches, remote control etc.
- automatic reset 20 minutes after well probe turns pump off
- protected against reverse polarity, overload and high
temperature
- speed control, max. pump speed adjustable to reduce flow
rate to approx. 30 %
- solar operation: integrated MPPT (Maximum Power Point
Tracking)
- battery operation: low voltage disconnect and restart after
battery has recovered
- max. efficiency 92 % (motor + controller)
- enclosure: IP 54 (sealed, weatherproof)
Motor ECDRIVE 1200 HR / C
- brushless DC motor
- water filled
- dynamic slide bearings, material: carbon/ceramic
- wetted material: stainless steel (AISI 316), POM, rubber,
cable drinking water approved
Pump end (PE)
- high life expectancy
- non-return valve
- dry running protection (optional)
- material: stainless steel (AISI 316), rubber
For HR pumps only
- helical rotor pump (positive displacement pump)
- two main parts only: stator and rotor
- stator: geometry made of abrasion resistant rubber
- rotor: stainless steel, hard chrome plated, abrasion
resistant
- more resistant to damage by sand than other pump types
- self-cleaning
- lift up to 50 m
- flow rate up to 22 m3/h
- simple installation
- maintenance-free
- high reliability and life expectancy
- cost-efficient pumping
- 2 years manufacturer's warranty against defects in material
and workmanship
Application
- drinking water supply
- livestock watering
- pond management
- irrigation
- etc.
Controller PS1800
- controlling of the pump system and monitoring of the
operating states
- mounted at surface (no submerged electronic parts)
- two control inputs for well probe (dry running protection),
float or pressure switches, remote control etc.
- automatic reset 20 minutes after well probe turns pump off
- protected against reverse polarity, overload and high
temperature
- speed control, max. pump speed adjustable to reduce flow
rate to approx. 30 %
- solar operation: integrated MPPT (Maximum Power Point
Tracking)
- battery operation: low voltage disconnect and restart after
battery has recovered
- max. efficiency 92 % (motor + controller)
- enclosure: IP 54 (sealed, weatherproof)
Motor ECDRIVE 1200 C
- brushless DC motor
- no electronic parts in the motor
- water filled
- IP68, pressure balanced, unlimited submersion
- dynamic slide bearings, material: carbon/ceramic
- wetted material: stainless steel (AISI 316), POM, rubber,
cable drinking water approved
Pump end (PE)
- high life expectancy
- non-return valve
- dry running protection (optional)
- material: stainless steel (AISI 316), rubber
|
